Model: HSRS-N

Description

Heat Shrinkable Cable Repair Sleeve (HSRS-N) is made of a crosslinked, heat-shrinkable, thermally stabilized polyolefin, which is coated with a hot-melt adhesive, it will bond at the temperatures attained during the shrinking operation. The HSRS-N has an aluminium canister providing mechanical protection of joint. Flexible crowns at the ends provide a smooth transition from the joint to the cable.

 

Features

>Quick and easy installation

>Covered with thermo paint

>Protection against mechanical stress

>Sleeve and channel can be cut to suit shorter applications

>For insulation on low voltage cable up to 1000V

>Hot melt adhesive forms a durable, moisture resistant seal

>Fit a wide range of cable sizes

 

Technical Data

Property

Test Method

Standard Value

Tensile strength

ASTM-D-638

≥13MPa

Elongation at break

ASTM -D- 638

≥300%

Tensile strength after aging

ASTM-D-2671/120,168hrs

≥11MPa

Elongation at break after aging

ASTM-D-2671/120,168hrs

≥210%

Volume resistance

ASTM-D-2303

≥1×1014Ω·cm

Dielectric strength

IEC 243

≥20kV/mm

Longitudinal shrinkage

≤ 10%

Eccentricity

ASTM-D-267

≤30%

Water absorption

ISO 62

≤0.1%

 

Specification

Description

Usage Range of Cable outer diameter(O.D.)

Composition

HSRS-N-28/6-

712

Heat-shrinkable sleeve

Metal canister (2 half shells)

Flexible stainless steel channels

Note:

  1. Other relevant accessories are available upon requests.
  2. The length could be any length less than 1.5m according to customers’ requests. 

 

HSRS-N-36/10-

1220

HSRS-N-50/15-

2040

HSRS-N-60/18-

3050

HSRS-N-70/22-

4060

HSRS-N-80/25-

5070

HSRS-N-100/30-

6090

HSRS-N-135/38-

70120

HSRS-N-164/42-

80150

HSRS-N-185/55-

90160

HSRS-N-200/60-

100180

HSRS-N-220/65-

120200

*Alternative for Raychem CRSM, 3M HDCW, CANUSA CRDW