Model: HSIT

Application:  

Heat shrinkable Insulating tape is specially designed to repair the buried / over the cable or pipe It is mainly used for insulating, anti-corrosive and mending purposes at the bending part. It may also be wound around the whole cable or pipe for insulating and anti-corrosive purpose. It uses crosslinked polyolefin as the base material with a special heat seal coating. Sound bonding is formed on the pipe or cable surface when applied together with solid epoxy coating.

 

1. Partial Repair of the cable protective layers suffered by mechanical and heat damage and erosions and breakages caused by organic solvents;
2. Waterproof treatment at the ends of protective sleevings of heat shrinkable power cable joints ;
3. Protection of electriferous naked conductors and treatment of shortcut circuit caused by icicles ;
4. Anti-corrosion and seal of pipes ;
5. Insulation of bus bars in switchgear cupboards and power stations ;
6. Other areas where insulations and seals are needed.

 

Color: Red, Yellow, Green and Black

Characteristics:
1. Self shrink rate> 30%;
2. Operating temperature: -55℃~105℃;
3. Shrink Temperature: 125℃.

Property:

property

Test Method

Standard Value

  Tensile strength

  ASTM D638

  ≥10.4MPa

  Elongation

  ASTM D638

 200%

  Tensile after aging

  ASTMD 2671/120℃, 168h

  ≥10MPa

  Elongation after aging

  ASTMD 2671/120℃, 168h

 200%

  Dielectric Strength

  IEC 243

 10kV/mm

  Volume Resistivity

  IEC 250

  ≥1014Ω. cm

 

Specification:

Size

Standard Width(mm)

Standard Thickness(mm)

Standard Length(m)

  HSIT-0825

  25

  0. 8±0. 1

  5 or 10

  HSIT-0850

  50

  0. 8±0. 1

  5 or 10

  HSIT-08100

  100

  0. 8±0. 1

  5 or 10

  HSIT-1025

  25

  1. 0±0. 1

  5 or 10

  HSIT-1050

  50

  1. 0±0. 1

  5 or 10

  HSIT-10100

  100

  1. 0±0. 1

  5 or 10

   HSIT-S

   50

  1. 5±0. 1

   6

Other sizes are available upon request.